Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Flow Rate | 57 lpm |
| RPM [Max] | 585 rpm |
| Paint Code | A |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Port Size | 1/2 |
| Mounting Holes | 0.535 in |
| Case Drain | G 1/4 (BSP) |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Output Shaft Code | 01 |
| Shaft Type | Straight w/ Woodruff Key |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.187 in |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.565 in |
| Pressure [Max] | 1800 psi |
| Port Code | E |
| Series | H Series |
| Mount Type | 2 Bolt |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Splines | 0 |
| Displacement (in³/rev) | 5.86 |
| Mounting Type Code | A |
| Port Type | BSPP |
| Case Drain Code | 2 |
| RPM [Min] | 585 rpm |
| Weight | 13.0 LB |
