Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 14 gal/min |
| Paint Code | A |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Pilot Diameter | 3.25 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Code | E |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | 1/2, G 1/2 |
| Port Type | BSPP |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.565 in |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Series | H Series |
| Case Drain Code | 2 |
| Bolt Circle Dia. | 4.187 in |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Special Features | None |
| Mounting Type Code | A |
| Mounting Holes | 0.535 in |
| RPM [Max] | 353 rpm |
| Pressure [Max] | 1650 psi |
| Displacement (in³/rev) | 9.7 |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| RPM [Min] | 353 rpm |
| Weight | 13.0 LB |
