Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Port Code | E |
| Port Type | BSPP |
| Special Features | None |
| Displacement (in³/rev) | 11.29 |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Series | H Series |
| Case Drain Code | 2 |
| RPM [Max] | 304 rpm |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Flange Orientation | Standard |
| Splines | 0 |
| Case Drain | G 1/4 (BSP) |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Min] | 304 rpm |
| Output Shaft Code | 01 |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1600 psi |
| Port Size | 1/2 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.565 in |
| Flow Rate | 57 lpm |
| Bolt Circle Dia. | 4.187 in |
| Material | Cast Iron |
| Paint Code | A |
| Weight | 13.0 LB |
