Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Code | E |
| Mounting Type Code | A |
| Series | H Series |
| Pressure [Max] | 1600 psi |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 57 lpm |
| Splines | 0 |
| Rotation | Standard Rotation |
| RPM [Max] | 304 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 304 rpm |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Case Drain | G 1/4 (BSP) |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Port Type | BSPP |
| Material | Cast Iron |
| Port Size | 1/2 |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Displacement (in³/rev) | 11.29 |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.187 in |
| Case Drain Code | 2 |
| Flange Orientation | Standard |
| Weight | 13.0 LB |
