Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1450 psi |
| RPM [Min] | 243 rpm |
| Special Features | None |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.565 in |
| Corrosion Resistant | No |
| Port Size | 1/2 |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | BSPP |
| Bolt Circle Dia. | 4.187 in |
| Special Features Assembly Code | 0 |
| Case Drain | G 1/4 (BSP) |
| RPM [Max] | 243 rpm |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Case Drain Code | 2 |
| Mount Type | 2 Bolt |
| Splines | 0 |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Flow Rate | 57 lpm |
| Displacement (in³/rev) | 14.1 |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Port Code | E |
| Weight | 13.0 LB |
