Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Mounting Hole Size | 0.565 in |
| Duty | Standard-Duty |
| Case Drain Code | 2 |
| Output Shaft Code | 01 |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Port Size | 1/2 |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Seal Material | Buna-N |
| Case Drain | G 1/4 (BSP) |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Flow Rate | 57 lpm |
| Series | H Series |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | 00 |
| Special Features | None |
| Port Code | E |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Displacement (in³/rev) | 14.1 |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 243 rpm |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| RPM [Max] | 243 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Pressure [Max] | 1450 psi |
| Port Type | BSPP |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.187 in |
| Weight | 13.0 LB |
