Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Code | E |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| RPM [Max] | 192 rpm |
| Bolt Circle Dia. | 4.19 in |
| Paint Code | A |
| Pressure [Max] | 1350 psi |
| Special Features | None |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Port Size | 1/2, G 1/2 |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 2 |
| Series | H Series |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Mounting Type Code | A |
| Pilot Diameter | 3.25 in |
| Port Type | BSPP |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 17.9 |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.535 in |
| Output Shaft Code | 01 |
| Flow Rate | 15 gal/min |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Weight | 13.0 LB |
