Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Rotation | Standard Rotation |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Paint Code | A |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1350 psi |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Special Features | None |
| Case Drain Code | 2 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Output Shaft Code | 01 |
| Port Type | BSPP |
| Port Size | 1/2, G 1/2 |
| Port Location | Side Port |
| Displacement (in³/rev) | 17.9 |
| Splines | 0 |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| RPM [Max] | 192 rpm |
| Mounting Hole Size | 0.535 in |
| Port Code | E |
| Flow Rate | 15 gal/min |
| Material | Cast Iron |
| Weight | 13.0 LB |
