Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Mounting Holes | 0.535 in |
| Special Features | None |
| Port Size | Manifold, M8 x 1.25 Threads |
| Motor Element | Gerotor |
| Port Code | D |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Shaft Type | Straight |
| Material | Cast Iron |
| RPM [Max] | 243 rpm |
| Pressure [Max] | 1450 psi |
| Bolt Circle Dia. | 4.187 in |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Series | H Series |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 0.565 in |
| Port Location | Side Port |
| Port Type | Manifold |
| Case Drain | G 1/4 (BSP) |
| Splines | 0 |
| RPM [Min] | 243 rpm |
| Output Shaft Code | 24 |
| Duty | Standard-Duty |
| Case Drain Code | 2 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Shaft Size & Type | Straight |
| Displacement (in³/rev) | 14.1 |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Pilot Diameter | 3.25 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Flow Rate | 57 lpm |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Weight | 13.0 LB |
