Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Splines | 0 |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Case Drain | G 1/4 (BSP) |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| RPM [Min] | 243 rpm |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Displacement (in³/rev) | 14.1 |
| Flow Rate | 57 lpm |
| Output Shaft Code | 24 |
| Special Features | None |
| Duty | Standard-Duty |
| Port Code | D |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Max] | 1450 psi |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.565 in |
| Case Drain Code | 2 |
| Seal Material | Buna-N |
| Shaft Type | Straight |
| Port Type | Manifold |
| Material | Cast Iron |
| Shaft Size & Type | Straight |
| Port Size | Manifold, M8 x 1.25 Threads |
| Rotation | Standard Rotation |
| Series | H Series |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| RPM [Max] | 243 rpm |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
