Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Case Drain Code | 2 |
| Shaft Type | Straight |
| Shaft Size & Type | Straight |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Mounting Hole Size | 0.565 in |
| Case Drain | G 1/4 (BSP) |
| Splines | 0 |
| Output Shaft Code | 24 |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Port Code | D |
| Series | H Series |
| RPM [Max] | 192 rpm |
| Special Features | None |
| Pressure [Max] | 1350 psi |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Flow Rate | 57 lpm |
| Port Type | Manifold |
| Material | Cast Iron |
| Paint Code | A |
| Pilot Diameter | 3.25 in |
| Port Size | Manifold, M8 x 1.25 Threads |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.187 in |
| RPM [Min] | 192 rpm |
| Displacement (in³/rev) | 17.94 |
| Weight | 13.0 LB |
