Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | Straight |
| Pressure [Max] | 1800 psi |
| RPM [Max] | 760 rpm |
| Duty | Standard-Duty |
| Output Shaft Code | 24 |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Series | H Series |
| Displacement (in³/rev) | 4.52 |
| Mounting Hole Size | 0.565 in |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Min] | 760 rpm |
| Special Features Hardware Code | 00 |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| Splines | 0 |
| Flow Rate | 14 gal/min |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Port Type | BSPP |
| Rotation | Standard Rotation |
| Shaft Type | Straight |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Size | 1/2, G 1/2 |
| Case Drain Code | 2 |
| Paint Code | A |
| Port Code | E |
| Bolt Circle Dia. | 4.187 in |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Mounting Type Code | A |
| Special Features | None |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Weight | 13.0 LB |
