Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Shaft Type | Straight |
| RPM [Max] | 760 rpm |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Output Shaft Code | 24 |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Port Size | 1/2, G 1/2 |
| Material | Cast Iron |
| Port Code | E |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.565 in |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | Straight |
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| Port Type | BSPP |
| Flange Orientation | Standard |
| Flow Rate | 14 gal/min |
| RPM [Min] | 760 rpm |
| Port Location | Side Port |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Displacement (in³/rev) | 4.52 |
| Pressure [Max] | 1800 psi |
| Series | H Series |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Case Drain Code | 2 |
| Bolt Circle Dia. | 4.187 in |
| Mounting Holes | 0.535 in |
| Weight | 13.0 LB |
