Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Pressure [Max] | 1650 psi |
| Mounting Type Code | A |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.565 in |
| Output Shaft Code | 24 |
| RPM [Max] | 353 rpm |
| Special Features | None |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Port Type | BSPP |
| Shaft Size & Type | Straight |
| Displacement (in³/rev) | 9.7 |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Port Code | E |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 2 |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Shaft Type | Straight |
| Port Size | 1/2, G 1/2 |
| Flow Rate | 14 gal/min |
| Motor Type | Spool Valve |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Material | Cast Iron |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Bolt Circle Dia. | 4.187 in |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Series | H Series |
| Weight | 13.0 LB |
