Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Rotation | Standard Rotation |
| Port Size | 1/2, G 1/2 |
| Pressure [Max] | 1650 psi |
| Displacement (in³/rev) | 9.7 |
| Series | H Series |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Shaft Type | Straight |
| Special Features | None |
| RPM [Max] | 353 rpm |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 24 |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Port Code | E |
| Mounting Hole Size | 0.565 in |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Flow Rate | 14 gal/min |
| Case Drain Code | 2 |
| Shaft Size & Type | Straight |
| Splines | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | BSPP |
| Port Location | Side Port |
| Special Features Hardware Code | 00 |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.187 in |
| Mounting Type Code | A |
| Weight | 13.0 LB |
