Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1350 psi |
| Port Size | 1/2, G 1/2 |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| RPM [Max] | 192 rpm |
| Splines | 0 |
| Flow Rate | 14 gal/min |
| Port Location | Side Port |
| Case Drain Code | 2 |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Shaft Size & Type | Straight |
| RPM [Min] | 192 rpm |
| Motor Type | Spool Valve |
| Special Features | None |
| Shaft Type | Straight |
| Port Code | E |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Type | BSPP |
| Series | H Series |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Bolt Circle Dia. | 4.187 in |
| Output Shaft Code | 24 |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | A |
| Mounting Hole Size | 0.565 in |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 17.94 |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Weight | 13.0 LB |
