Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mount Type | 2 Bolt |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Series | H Series |
| Port Code | E |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| RPM [Min] | 192 rpm |
| Shaft Type | Straight |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Case Drain Code | 2 |
| Special Features Hardware Code | 00 |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Port Type | BSPP |
| Output Shaft Code | 24 |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| RPM [Max] | 192 rpm |
| Port Size | 1/2, G 1/2 |
| Bolt Circle Dia. | 4.187 in |
| Mounting Type Code | A |
| Displacement (in³/rev) | 17.94 |
| Special Features | None |
| Material | Cast Iron |
| Shaft Size & Type | Straight |
| Pressure [Max] | 1350 psi |
| Motor Type | Spool Valve |
| Flow Rate | 14 gal/min |
| Paint Code | A |
| Weight | 13.0 LB |
