Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Flow Rate | 14 gal/min |
| RPM [Min] | 152 rpm |
| Case Drain Code | 2 |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Motor Type | Spool Valve |
| Port Code | E |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Mounting Type Code | A |
| Output Shaft Code | 24 |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 22.58 |
| Shaft Type | Straight |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Port Size | 1/2, G 1/2 |
| Paint Code | A |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Pressure [Max] | 1250 psi |
| RPM [Max] | 152 rpm |
| Series | H Series |
| Bolt Circle Dia. | 4.187 in |
| Flange Orientation | Standard |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Shaft Size & Type | Straight |
| Motor Element | Gerotor |
| Port Type | BSPP |
| Splines | 0 |
| Mounting Hole Size | 0.565 in |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Weight | 13.0 LB |
