Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size & Location | SAE-10 Side |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Port Code | A |
| Mounting Hole Size | 0.535 in |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| RPM [Max] | 152 rpm |
| Mount Type | 2 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Port Type | SAE O-Ring |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Flow Rate | 15 gal/min |
| RPM [Min] | 152 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Pressure [Max] | 1250 psi |
| Output Shaft Code | 01 |
| Series | H Series |
| Mounting Type Code | A |
| Bolt Circle Dia. | 4.19 in |
| Special Features | None |
| Splines | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Type | Spool Valve |
| Case Drain Code | 1 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF |
| Flow [Max] | 15 gal/min |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Displacement (in³/rev) | 22.6 |
| Weight | 13.0 LB |
