Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mount Type | 2 Bolt |
| Port Location | Side Port |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| Case Drain Code | 1 |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Port Size | 1/2, 1/2-14 |
| Mounting Holes | 0.535 in |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| RPM [Max] | 152 rpm |
| Flow Rate | 14 gal/min |
| Output Shaft Code | 01 |
| Pilot Diameter | 3.25 in |
| Series | H Series |
| Paint Code | A |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Type | NPTF |
| Pressure [Max] | 1250 psi |
| Port Code | B |
| Bolt Circle Dia. | 4.187 in |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Hole Size | 0.565 in |
| Mounting Type Code | A |
| Special Features | None |
| Displacement (in³/rev) | 22.58 |
| RPM [Min] | 152 rpm |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Material | Cast Iron |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Flow [Max] | 15 gal/min |
| Splines | 0 |
| Corrosion Resistant | No |
| Weight | 13.0 LB |
