Find a Service Center
- H Series Hydraulic Motor
- 15 gal/min
- 8.9 in3
- Shaft: 1 in Straight w/Woodruff Key
- 1/2 Side Port
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1954 in lb |
| Port Code | E |
| Flow [Max] | 15 gal/min |
| Paint Code | A |
| Displacement (in³/rev) | 8.9 |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Seal Material | Buna-N |
| Output Shaft Code | 01 |
| Splines | 0 |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Port Type | BSPP |
| Special Features | None |
| Mounting Type Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Bolt Circle Dia. | 4.18 in |
| Port Size | 1/2 |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 2 |
| Series | H Series |
| Motor Element | Gerotor |
| RPM [Max] | 385 rpm |
| Pressure [Max] | 1700 psi |
| Special Features Hardware Code | 00 |
| Case Drain | G 1/4 (BSP) |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt, SAE-A |
| Special Features Assembly Code | 0 |
| Corrosion Resistant | No |
| Weight | 13.0 LB |
