Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | Free Running Gerotor |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Duty | Standard-Duty |
| Motor Type | Spool Valve |
| RPM [Max] | 953 rpm |
| Splines | 6 |
| Output Torque at Rated PSI (inch/pounds) | 805.42 in lb |
| Port Size & Location | SAE-10 Side |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Series | H Series |
| Geroter/Geroler Options | Free Running |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Special Features Assembly Code | 0 |
| RPM [Min] | 953 rpm |
| Port Type | SAE O-Ring |
| Bolt Circle Dia. | 4.19 in |
| Mounting Type Code | A |
| Port Code | A |
| Seal Material | Buna-N |
| Pressure [Max] | 1800 psi |
| Case Drain | None |
| Rotation | Standard Rotation |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Output Shaft Code | 02 |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Shaft Type | Splined |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | SAE-10, 7/8-14 UNF |
| Flow Rate | 15 gal/min |
| Special Features Hardware Code | AA |
| Shaft Size & Type | 1 in - 6T Spline |
| Motor Element | Gerotor |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Displacement (in³/rev) | 3.5 |
| Weight | 11.5 LB |
