Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 3.54 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.565 in |
| Pressure [Max] | 1800 psi |
| Motor Type | Spool Valve |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Series | H Series |
| RPM [Max] | 953 rpm |
| Case Drain Code | 2 |
| Shaft Size & Type | Straight |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Special Features | Free Running Gerotor |
| Pilot Diameter | 3.25 in |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Splines | 0 |
| Port Type | BSPP |
| Seal Material | Buna-N |
| Flange Orientation | Standard |
| Flow Rate | 14 gal/min |
| Duty | Standard-Duty |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 3.54 |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Material | Cast Iron |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | AA |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 805 in lb |
| Geroter/Geroler Options | Free Running |
| Bolt Circle Dia. | 4.187 in |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Port Size | 1/2, G 1/2 |
| Output Shaft Code | 24 |
| Mounting Type Code | A |
| Port Code | E |
| Shaft Type | Straight |
| RPM [Min] | 953 rpm |
| Corrosion Resistant | No |
| Weight | 13.0 LB |
