Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 8.91 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mount Type | 2 Bolt |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Motor Type | Spool Valve |
| Pilot Diameter | 3.25 in |
| RPM [Min] | 385 rpm |
| Material | Cast Iron |
| Port Size | 1/2, G 1/2 |
| Output Shaft Code | 24 |
| Pressure [Max] | 1700 psi |
| Motor Element | Gerotor |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Code | E |
| RPM [Max] | 385 rpm |
| Bolt Circle Dia. | 4.187 in |
| Port Location | Side Port |
| Flow Rate | 14 gal/min |
| Splines | 0 |
| Paint Code | A |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 8.91 |
| Flange Orientation | Standard |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Series | H Series |
| Mounting Hole Size | 0.565 in |
| Port Type | BSPP |
| Shaft Type | Straight |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Duty | Standard-Duty |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Case Drain Code | 2 |
| Shaft Size & Type | Straight |
| Weight | 13.0 LB |
