Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 8.91 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Port Code | E |
| Pressure [Max] | 1700 psi |
| Corrosion Resistant | No |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Flow [Max] | 15 gal/min |
| Port Size | 1/2, G 1/2 |
| Paint Code | A |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Case Drain Code | 2 |
| Mount Type | 2 Bolt |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Max] | 385 rpm |
| Motor Element | Gerotor |
| Shaft Type | Straight |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 8.91 |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Shaft Size & Type | Straight |
| Material | Cast Iron |
| Port Type | BSPP |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 4.187 in |
| Mounting Hole Size | 0.565 in |
| Series | H Series |
| Mounting Type Code | A |
| RPM [Min] | 385 rpm |
| Special Features | None |
| Output Shaft Code | 24 |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Flow Rate | 14 gal/min |
| Weight | 13.0 LB |
