Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Seal Material | Buna-N |
| Special Features Hardware Code | AA |
| Mounting Type Code | B |
| Rotation | Standard Rotation |
| Port Code | C |
| Pilot Diameter | 1.75 in |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Port Type | Manifold |
| Flow Rate | 10 gal/min |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Mount Type | 4 Bolt |
| Mounting Hole Size | 3/8 in |
| Special Features | Free Running Gerotor |
| Duty | Standard-Duty |
| Geroter/Geroler Options | Free Running |
| RPM [Max] | 1021 rpm |
| Pressure [Max] | 1800 psi |
| Splines | 0 |
| Series | H Series |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 2.2 |
| Special Features Assembly Code | 0 |
| Flow [Max] | 10 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Port Location | Side Port |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Case Drain | None |
| RPM [Min] | 1021 rpm |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 11.2 LB |
