Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Geroter/Geroler Options | Free Running |
| Pressure [Max] | 1800 psi |
| Paint Code | A |
| Port Size | 1/2, 1/2-14 |
| Mounting Type Code | B |
| RPM [Max] | 1021 rpm |
| Mount Type | 4 Bolt |
| Bolt Circle Dia. | 3 1/4 in |
| Rotation | Standard Rotation |
| Output Shaft Code | 02 |
| Special Features Hardware Code | AA |
| Mounting Holes | 3/8-16 |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow Rate | 9.5 gal/min |
| Pilot Diameter | 1.75 in |
| Seal Material | Buna-N |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Special Features | Free Running Gerotor |
| Series | H Series |
| Case Drain | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Port Location | Side Port |
| Material | Cast Iron |
| Splines | 6 |
| Port Type | NPTF |
| RPM [Min] | 1021 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 3/8 in |
| Duty | Standard-Duty |
| Flow [Max] | 10 gal/min |
| Shaft Type | Splined |
| Corrosion Resistant | No |
| Port Size & Location | 1/2 in NPTF Side |
| Displacement (in³/rev) | 2.2 |
| Port Code | B |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Weight | 11.2 LB |
