Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Seal Material | Buna-N |
| Displacement (in³/rev) | 2.2 |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Output Shaft Code | 02 |
| Case Drain | None |
| Mount Type | 4 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Geroter/Geroler Options | Free Running |
| Port Code | B |
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | NPTF |
| RPM [Min] | 1021 rpm |
| Special Features Assembly Code | 0 |
| RPM [Max] | 1021 rpm |
| Port Location | Side Port |
| Pilot Diameter | 1.75 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Splines | 6 |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Port Size | 1/2, 1/2-14 |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Flow [Max] | 10 gal/min |
| Flow Rate | 9.5 gal/min |
| Mounting Type Code | B |
| Corrosion Resistant | No |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Holes | 3/8-16 |
| Shaft Type | Splined |
| Rotation | Standard Rotation |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Hole Size | 3/8 in |
| Paint Code | A |
| Special Features | Free Running Gerotor |
| Duty | Standard-Duty |
| Series | H Series |
| Special Features Hardware Code | AA |
| Pressure [Max] | 1800 psi |
| Weight | 11.2 LB |
