Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Port Type | NPTF |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Splines | 0 |
| Port Location | Side Port |
| Displacement (in³/rev) | 5.9 |
| RPM [Min] | 585 rpm |
| Shaft Type | Straight w/ Cross Hole |
| Motor Type | Spool Valve |
| Output Shaft Code | 08 |
| Port Code | B |
| Mounting Hole Size | 0.535 in |
| Series | H Series |
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Pressure [Max] | 1800 psi |
| Rotation | Standard Rotation |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Seal Material | Buna-N |
| Shaft Size & Type | Straight |
| Special Features Assembly Code | 0 |
| Mounting Type Code | A |
| Flow Rate | 15 gal/min |
| Duty | Standard-Duty |
| Case Drain | None |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | 1/2, 1/2-14 |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| RPM [Max] | 585 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Special Features | None |
| Weight | 11.8 LB |
