Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Hole Size | 0.535 in |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 08 |
| Duty | Standard-Duty |
| Shaft Size & Type | Straight |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Special Features | None |
| Flange Orientation | Standard |
| Port Type | NPTF |
| Splines | 0 |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Cross Hole |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | 1/2 in NPTF Side |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Flow Rate | 15 gal/min |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Port Size | 1/2, 1/2-14 |
| Port Code | B |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| RPM [Max] | 585 rpm |
| Paint Code | A |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | None |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 5.9 |
| RPM [Min] | 585 rpm |
| Weight | 11.8 LB |
