Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Size & Location | SAE-10 Side |
| Series | H Series |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 3 1/4 in |
| Paint Code | A |
| Shaft Size & Type | Straight |
| Pilot Diameter | 1.75 in |
| Special Features Hardware Code | AA |
| Port Type | SAE O-Ring |
| Geroter/Geroler Options | Free Running |
| Mounting Holes | 3/8-16 |
| Pressure [Max] | 1800 psi |
| Port Location | Side Port |
| Mounting Type Code | B |
| Motor Type | Spool Valve |
| Mount Type | 4 Bolt |
| Case Drain Code | 0 |
| Flow [Max] | 10 gal/min |
| Special Features | Free Running Gerotor |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Cross Hole |
| RPM [Max] | 1021 rpm |
| Port Size | SAE-10, 7/8-14 UNF |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Port Code | A |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 2.2 |
| Flow Rate | 10 gal/min |
| Duty | Standard-Duty |
| Output Shaft Code | 08 |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Weight | 11.2 LB |
