Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pilot Diameter | 1.75 in |
| Shaft Type | Straight w/ Cross Hole |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Special Features | Free Running Gerotor |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 2.2 |
| Splines | 0 |
| Series | H Series |
| Port Location | Side Port |
| Case Drain | None |
| Output Shaft Code | 08 |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Type Code | B |
| Material | Cast Iron |
| Geroter/Geroler Options | Free Running |
| Shaft Size & Type | Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Port Size & Location | SAE-10 Side |
| Mounting Hole Size | 3/8 in |
| Mount Type | 4 Bolt |
| Port Code | A |
| Flow Rate | 10 gal/min |
| Pressure [Max] | 1800 psi |
| Port Size | SAE-10, 7/8-14 UNF |
| Flange Orientation | Standard |
| Paint Code | A |
| Port Type | SAE O-Ring |
| Case Drain Code | 0 |
| RPM [Max] | 1021 rpm |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| Special Features Hardware Code | AA |
| Motor Element | Gerotor |
| Flow [Max] | 10 gal/min |
| Seal Material | Buna-N |
| Weight | 11.2 LB |
