Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| Port Size | 1/2, 1/2-14 |
| Special Features Assembly Code | 0 |
| Mounting Type Code | B |
| Mount Type | 4 Bolt |
| Port Code | B |
| Flow [Max] | 15 gal/min |
| Series | H Series |
| Displacement (in³/rev) | 7.3 |
| Pressure [Max] | 1800 psi |
| Mounting Hole Size | 3/8 in |
| Flow Rate | 15 gal/min |
| Pilot Diameter | 1.75 in |
| Shaft Type | Straight w/ Cross Hole |
| Special Features Hardware Code | 00 |
| Port Type | NPTF |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Shaft Size | 1 |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| RPM [Min] | 469 rpm |
| Paint Code | A |
| Splines | 0 |
| Case Drain Code | 0 |
| Output Shaft Code | 08 |
| Mounting Holes | 3/8-16 |
| Bolt Circle Dia. | 3 1/4 in |
| Viscocity (SUS) [Max] | 100 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 469 rpm |
| Shaft Size & Type | Straight |
| Flange Orientation | Standard |
| Port Size & Location | 1/2 in NPTF Side |
| Case Drain | None |
| Weight | 12.1 LB |
