Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Seal Material | Buna-N |
| Pilot Diameter | 1.75 in |
| Flow Rate | 15 gal/min |
| Shaft Type | Straight w/ Cross Hole |
| Material | Cast Iron |
| Port Type | NPTF |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Shaft Size & Type | Straight |
| Mounting Type Code | B |
| Port Code | B |
| Mounting Holes | 3/8-16 |
| Special Features Hardware Code | 00 |
| Mount Type | 4 Bolt |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Port Size & Location | 1/2 in NPTF Side |
| Viscocity (SUS) [Max] | 100 |
| Port Location | Side Port |
| RPM [Max] | 469 rpm |
| Pressure [Max] | 1800 psi |
| Special Features | None |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Size | 1 |
| RPM [Min] | 469 rpm |
| Mounting Hole Size | 3/8 in |
| Displacement (in³/rev) | 7.3 |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Case Drain Code | 0 |
| Case Drain | None |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Output Shaft Code | 08 |
| Port Size | 1/2, 1/2-14 |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Weight | 12.1 LB |
