Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| Motor Element | Gerotor |
| Corrosion Resistant | Yes |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 1.75 in |
| Port Code | B |
| Rotation | Standard Rotation |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| Mounting Type Code | B |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Mount Type | 4 Bolt |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Port Location | Side Port |
| Flow [Max] | 12 gal/min |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Holes | 3/8-16 |
| RPM [Max] | 969 rpm |
| Output Shaft Code | 27 |
| Motor Type | Spool Valve |
| Duty | Corrosion Resistant-Duty |
| Port Type | NPTF |
| Port Size | 1/2, 1/2-14 |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Shaft Size & Type | Straight |
| Case Drain | None |
| Flange Orientation | Standard |
| Paint Code | D |
| Mounting Hole Size | 3/8 in |
| Port Size & Location | 1/2 in NPTF Side |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 2.81 |
| Shaft Options | Nickel Plated |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Flow Rate | 11.25 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Weight | 11.2 LB |
