Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Mount Type | 2 Bolt |
| Geroter/Geroler Options | Free Running |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Output Shaft Code | 01 |
| Flow Rate | 15 gal/min |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| RPM [Max] | 192 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Flow [Max] | 15 gal/min |
| Port Code | C |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.19 in |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Port Type | Manifold |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | AA |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Splines | 0 |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Case Drain Code | 0 |
| Pressure [Max] | 1350 psi |
| Case Drain | None |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Duty | Standard-Duty |
| Special Features | Free Running Gerotor |
| Displacement (in³/rev) | 17.9 |
| RPM [Min] | 192 rpm |
| Mounting Hole Size | 0.535 in |
| Paint Code | A |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Series | H Series |
| Weight | 13.0 LB |
