Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features | Free Running Gerotor |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Type | Manifold |
| Mounting Hole Size | 0.535 in |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| RPM [Min] | 192 rpm |
| Port Code | C |
| RPM [Max] | 192 rpm |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 17.9 |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Shaft Type | Straight w/ Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Series | H Series |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Geroter/Geroler Options | Free Running |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Pressure [Max] | 1350 psi |
| Output Shaft Code | 01 |
| Special Features Hardware Code | AA |
| Case Drain | None |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Motor Element | Gerotor |
| Paint Code | A |
| Weight | 13.0 LB |
