Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1800 psi |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Rotation | Standard Rotation |
| Splines | 0 |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Output Shaft Code | 01 |
| Special Features | None |
| Bolt Circle Dia. | 4.19 in |
| RPM [Min] | 469 rpm |
| Port Code | B |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size | 1/2, 1/2-14 |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 7.3 |
| Case Drain Code | 1 |
| Flow [Max] | 15 gal/min |
| Series | H Series |
| Paint Code | A |
| Corrosion Resistant | No |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Type Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| RPM [Max] | 469 rpm |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Motor Element | Gerotor |
| Flow Rate | 15 gal/min |
| Port Location | Side Port |
| Weight | 13.0 LB |
