Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Special Features Hardware Code | 00 |
| Paint Code | A |
| Seal Material | Buna-N |
| Port Code | B |
| Output Shaft Code | 01 |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Duty | Standard-Duty |
| Case Drain Code | 1 |
| Port Type | NPTF |
| Displacement (in³/rev) | 7.3 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1800 psi |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Min] | 469 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Flow Rate | 15 gal/min |
| Corrosion Resistant | No |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Mounting Type Code | A |
| Special Features | None |
| RPM [Max] | 469 rpm |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Port Size | 1/2, 1/2-14 |
| Pilot Diameter | 3.25 in |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Series | H Series |
| Weight | 13.0 LB |
