Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Seal Material | Buna-N |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Rotation | Standard Rotation |
| RPM [Min] | 585 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 5.86 |
| Flange Orientation | Standard |
| Port Type | SAE O-Ring |
| Duty | Standard-Duty |
| Bolt Circle Dia. | 4.187 in |
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Mounting Hole Size | 0.565 in |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| RPM [Max] | 585 rpm |
| Flow Rate | 14 gal/min |
| Material | Cast Iron |
| Paint Code | A |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Series | H Series |
| Motor Element | Gerotor |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Special Features | None |
| Special Features Hardware Code | 00 |
| Pressure [Max] | 1800 psi |
| Port Code | A |
| Mounting Type Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Case Drain Code | 1 |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight w/ Woodruff Key |
| Weight | 13.0 LB |
