Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| RPM [Min] | 243 rpm |
| RPM [Max] | 243 rpm |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Port Type | SAE O-Ring |
| Paint Code | A |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 14.1 |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Mounting Holes | 0.535 in |
| Pressure [Max] | 1450 psi |
| Mounting Type Code | A |
| Bolt Circle Dia. | 4.19 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Flow Rate | 15 gal/min |
| Motor Type | Spool Valve |
| Series | H Series |
| Port Size | SAE-10, 7/8-14 UNF |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Port Code | A |
| Material | Cast Iron |
| Case Drain Code | 1 |
| Splines | 0 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Weight | 13.0 LB |
