Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain Code | 1 |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1450 psi |
| Duty | Standard-Duty |
| Output Shaft Code | 01 |
| Flow Rate | 15 gal/min |
| Mount Type | 2 Bolt |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Special Features Hardware Code | 00 |
| Port Size | SAE-10, 7/8-14 UNF |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Splines | 0 |
| Series | H Series |
| Port Location | Side Port |
| Port Code | A |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| RPM [Max] | 243 rpm |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Port Type | SAE O-Ring |
| Displacement (in³/rev) | 14.1 |
| RPM [Min] | 243 rpm |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size & Location | SAE-10 Side |
| Weight | 13.0 LB |
