Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 4.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Rotation | Standard Rotation |
| Mounting Hole Size | 3/8 in |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Port Type | Manifold |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 2000 psi |
| Material | Cast Iron |
| Flow [Max] | 15 gal/min |
| Mount Type | 4 Bolt |
| Splines | 0 |
| Series | S Series |
| Special Features | None |
| Seal Material | Buna-N |
| Mounting Type Code | REF! |
| Shaft Type | Straight w/ Woodruff Key |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| Maximum Speed @ Continuous Flow | 792 rpm @ 15 gal/min |
| RPM [Min] | 792 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1325 in lb |
| Paint Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Shaft Code | 01 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| RPM [Max] | 792 rpm |
| Port Code | C |
| Special Features Hardware Code | 00 |
| Displacement (in³/rev) | 4.6 |
| Special Features Assembly Code | 0 |
| Case Drain Code | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 29.0 LB |
