Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Increased shaft seal
- Compact yet powerful
- Extended bearing life
| Motor Element | Gerotor |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Paint Code | A |
| Port Type | SAE O-Ring |
| Output Shaft Code | 02 |
| Flow [Max] | 15 gal/min |
| Special Features | None |
| Shaft Size & Type | 1 in - 6T Spline |
| Bolt Circle Dia. | 4.19 in |
| Port Code | A |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Mounting Type Code | REF! |
| Duty | Standard-Duty |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 343 rpm |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Series | S Series |
| Displacement (in³/rev) | 10.07 |
| Output Torque at Rated PSI (inch/pounds) | 2664.07 in lb |
| Case Drain | None |
| Pressure [Max] | 1900 psi |
| Case Drain Code | 0 |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 6 |
| Special Features Assembly Code | 0 |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Splined |
| Mounting Holes | 0.535 in |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| RPM [Max] | 165 rpm, 343 rpm |
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Port Size | SAE-10, 7/8-14 UNF |
| Seal Material | Buna-N |
| Port Location | Side Port |
| Weight | 29.0 LB |
