Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 5.7 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Bolt Circle Dia. | 4.19 in |
| Special Features | None |
| Pressure [Max] | 2000 psi |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 607 rpm @ 15 gal/min |
| Flow [Max] | 15 gal/min |
| Output Shaft Code | 24 |
| Case Drain Code | 2 |
| Mount Type | 2 Bolt |
| Series | S Series |
| Port Type | BSPP |
| Flow Rate | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1623 in lb |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Port Location | Side Port |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Shaft Type | Straight |
| Port Code | E |
| Port Size | 1/2, G 1/2 |
| Paint Code | A |
| RPM [Max] | 607 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Type Code | REF! |
| Special Features Hardware Code | 00 |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 5.7 |
| Shaft Size & Type | Straight |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Splines | 0 |
| Weight | 29.0 LB |
