Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Max] | 343 rpm |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Series | S Series |
| Seal Material | Buna-N |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 01 |
| Port Size | 1/2, 1/2-14 |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Assembly Code | 0 |
| Port Code | B |
| Splines | 0 |
| Rotation | Standard Rotation |
| Case Drain Code | 1 |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 2662 in lb |
| Special Features | None |
| Special Features Hardware Code | 00 |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Pressure [Max] | 1900 psi |
| Pilot Diameter | 3.25 in |
| Motor Type | Spool Valve |
| Flow Rate | 15 gal/min |
| Paint Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Mounting Type Code | REF! |
| Port Location | Side Port |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 10.07 |
| Mount Type | 2 Bolt |
| Bolt Circle Dia. | 4.19 in |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Weight | 29.0 LB |
