Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 10.07 |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 2662 in lb |
| Corrosion Resistant | No |
| Port Size & Location | 1/2 in NPTF Side |
| Seal Material | Buna-N |
| Port Code | B |
| Series | S Series |
| Pressure [Max] | 1900 psi |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Location | Side Port |
| Flow Rate | 15 gal/min |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Bolt Circle Dia. | 4.19 in |
| Splines | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Special Features | None |
| Output Shaft Code | 01 |
| Case Drain Code | 1 |
| Flow [Max] | 15 gal/min |
| Port Type | NPTF |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | REF! |
| Motor Element | Gerotor |
| Material | Cast Iron |
| Port Size | 1/2, 1/2-14 |
| Flange Orientation | Standard |
| RPM [Max] | 343 rpm |
| Weight | 29.0 LB |
