Find a Service Center
- Spool Motor
- Geroler
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 13.67 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
footnote
- Low speed valve.
| Paint/Packaging | Low Gloss Black |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 1 |
| Shaft Size | 1 |
| Port Code | A |
| Output Shaft Code | 02 |
| Bolt Circle Dia. | 4.187 in |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Port Type | SAE O-Ring |
| Case Drain | SAE-4 |
| Duty | Standard-Duty |
| RPM [Min] | 224 rpm |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1700 psi |
| Mounting Type Code | REF! |
| Flange Orientation | Standard |
| Special Features Hardware Code | 00 |
| Port Location | Side Port |
| Flow Rate | 57 lpm |
| Material | Cast Iron |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Series | S Series |
| Mounting Holes | 0.535 in |
| Motor Element | Geroler |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in - 6T Spline |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 13.67 |
| Corrosion Resistant | No |
| Splines | 6 |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 253 rpm @ 15 gal/min |
| Paint Code | A |
| Port Size & Location | SAE-10 Side |
| Output Torque at Rated PSI (inch/pounds) | 3290 in lb |
| (Catalog) Shaft Type | 1 in - 6T Spline |
| Mounting Hole Size | 0.565 in |
| RPM [Max] | 253 rpm |
| Shaft Type | Splined |
| Weight | 29.0 LB |
