Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Seal Kit Buna | 565803 |
| Temperature Range [Min] | -40 °F |
| Recommend Filtration Level | 18/16/13 microns |
| Type | Pressure Relief Valve |
| Model No. | RV1-10-S-0-18/11 |
| Cracking Pressure [Max] | 1800 psi |
| Pressure Setting | 1023 psi |
| Operation | Direct Acting |
| Series | RV1-10 |
| Port Type | Cartridge Only |
| Style | Poppet |
| Flow [Max] | 8 gal/min |
| Port Size | Cartridge Only |
| Seal Material | Buna-N |
| Seal Kit Viton | 566086 |
| Valve Torque into Cavity | 47 to 54 Nm |
| Installation | Screw-in Cartridge |
| Operating Pressure [Max] | 3046 psi |
| No. of Valve Ports | 2 |
| Pilot Ratio | 100:1 |
| Adjustment Type | Screw |
| Cavity | C-10-2 |
| Pressure [Max] | 3046 psi |
| Temperature Range [Max] | 248 °F |
| No. of Housing Ports | 2 |
| Operating Pressure [Min] | 247 psi |
| Cracking Pressure [Min] | 250 psi |
| Leakage | 0.25 cc/min |
| Valve Material | Cartridge only |
| Body Type | 1 |
| Housing Material | Cartridge Only |
| Manufacturer Part No. | RV1-10-S-0-18/11 |
| Weight | 0.48 LB |
