Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Body Material | Gray Iron |
| Electrical Options | None |
| Design No. | 60 |
| Tank Port Rating | 1000 |
| Coil Type | Flying Leads |
| Leakage | Standard Performance |
| Coil Rating Code | B |
| Model No. | DG4S4-012A-B-60-LH |
| Pilot/Drain | None |
| Temperature Range [Min] | 68 °F |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options Code | None |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| No. of Stages | Single Stage |
| Reducer Module | No |
| Crossover | All Ports Blocked |
| Center Position | All Ports Blocked |
| Response Type | Standard Response |
| Surge Suppressor/Damper | None |
| Solenoid | Single |
| Coil Type Code | None |
| Valve Type | Standard-Duty |
| Seal Material | Buna-N |
| Pressure [Max] | 3600 psi |
| NFPA Size | D05 |
| Function | 2-Position Spring Offset |
| Pilot Valve Type | N/A |
| Mechanical Options | Single Solenoid Reverse Assembly |
| Actuator Type | Solenoid |
| Watt Rating | 35 W |
| Spool Code | 2 |
| Overrides | No Overrides |
| Cycle Rate [Max] | N/A |
| Rated Flow [Max] | 20 gal/min |
| Mechanical Options Code | LH |
| Port T Pressure Rating | 1000 psi |
| Temperature Range [Max] | 179.6 °F |
| Spool Spring Arrangement Code | A |
| Flow Direction Code | 4 |
| Mounting | Subplate/Manifold Mount |
| Spool Center Condition | B Port End |
| Indicator Lights | No |
| Port Restrictor Plugs | None |
| Actuation Identification | Solenoid B |
| Electrical Connection | KU W/ Deutsch Connector |
| AC/DC | AC |
| Operation | Solenoid Operated |
| Fluid Cleanliness | 19/17/14 micron |
| Weight | 1.0 LB |
